Barco Encore, Manual

Page: 157 / 404

Encore Presentation System • User’s Guide 157
5. Menu Orientation
System Menu
póëíÉã=jÉåì=aÉëÅêáéíáçå
The figure below illustrates a sample System Menu :
Figure 5-16. System Menu (sample)
To access the menu:
•
Press SYSTEM on the Home Menu , or press System in the Keypad Section .
The System Menu enables you to configure the Controller:
•
Modify Layers On Program — when enabled, you can change PIPs and Keys
directly on Program, without first setting up your “look” on Preview. When
disabled, Preview must be used to set up the next look. In Chapter 7, refer to the
“
Modifying Layers On Program ” section on page 306 for details.
•
Tally Mode — enables or disables the tally function.
~
When enabled, all eight tallies are activated, and can be triggered by
pressing a source button.
~
When disabled, all tallies are deactivated (but tally setups remain as
configured).
In Chapter 6, refer to the “ Output Format Setup ” section on page 263 for tally
setup details. In Chapter 7, refer to the “ Working with Tallies ” section on
page 328 for tally operating instructions.
•
Press
{
RESET
}
to display the System Reset Menu . Refer to the “ System Reset
Menu ” section on page 159 for details.
•
Press
{
SW VER
}
to display the Software Version Menu . Refer to the “ Software
Version Menu ” section on page 160 for details.
•
Press
{
DIAG
}
to display the Diagnostics Setup Menu . Refer to the
“ Diagnostics Setup Menu ” section on page 161 for details.
•
Press
{
DEST SETUP
}
to display the Destination Setup Menu . Refer to the
“ Destination Setup Menu ” section on page 166 for details.
•
Press
{
NETWORK SETUP
}
to display the Network Setup Menu . Refer to the
“ Network Setup Menu ” section on page 171 for details.
H
O
M
E
N
A
V
A
D
J
SYSTEM MENU
D
I
A
G
DEST
SETUP
ROUTER
SETUP
R
E
S
E
T
SW
V
E
R
NETWORK
SETUP
INPUT
PATCH
Modify Layers On Program Off
Tally Mode Off