Barco Encore, Manual

Page: 306 / 404

306 Encore Presentation System • User’s Guide
7. Operations
Working with Layers
jçÇáÑóáåÖ=i~óÉêë=lå=mêçÖê~ã
Encore enables you to modify layers directly on Program, without first setting up a "look" on
Preview. The mode is typically used for creating a "look" on Program (especially in
conjunction with a large screen projector), when the Preview monitor may be too small to
realize the desired result.
„
Use the following steps to modify layers directly on Program:
1. In the System Keypad , press SYSTEM to display the System Menu .
2. Scroll to the Modify Layers On Program line and turn the mode ON . You can
now change PIPs and Keys directly on Program.
Please note:
•
When you switch sources directly on Program, you may notice a glitch in the
image as the scalers recall the source’s file.
•
If you use camera inputs in this mode, it is recommended that you use an external
Genlock signal. Refer to the " Understanding Input File Mapping " section on
page 287 for details on source files.