Barco Encore, Manual

Page: 109 / 404

Encore Presentation System • User’s Guide 109
4. Controller Orientation
Controller Sections
Save — press to save the state of the Encore Controller in non-volatile memory. Once
pressed, the Touch Screen reads “ Saving System Configuration .” If you cycle power, the
Controller will return to its state at the time of the “save.” In Chapter 6, refer to the “ Saving
the Setup ” section on page 277 for complete details.
^äéÜ~åìãÉêáÅ=hÉóé~Ç
The figure below shows the Alphanumeric Keypad which is used for certain numeric
functions on the Controller LC only.
Figure 4-5. Alphanumeric Keypad, Controller LC
The Alphanumeric Keypad enables you to enter and change numeric fields (on the Touch
Screen) without having to use a rotary knob (e.g., ADJ ), the Joystick’s Z-Axis Knob or a
customer supplied PS/2 Keyboard .
In Chapter 7, refer to the “ Using the Alphanumeric Keypad ” section on page 288 for
detailed instructions.
Save
1
ABC
2
DEF
3
Preset
GHI
4
JKL
5
MNO
6
Seq
PQRS
7
TUV
8
WXYZ
9
Time
Code
Clear 0 Enter