![background image](http://html1.mh-extra.com/html/barco/encore/encore_manual_3871756320.webp)
320
Encore Presentation System • User’s Guide
7. Operations
Working with Transitions
tçêâáåÖ=ïáíÜ=qê~åëáíáçåë
This section provides instructions for performing a variety of transitions. The following
topics are discussed:
•
Cut
•
Mix
•
Wipe
•
Manual Transitions
`ìí
Cuts can be performed on both single screen and widescreen destinations.
Use the following steps to perform a
Cut
:
1.
Set up the desired “look” in Preview.
2.
In the
Transition Section
, press
CUT
to instantly cut the setup to Program.
Cuts can also be performed directly on Program in the following three modes:
•
Modify Layers on Program
is enabled. Refer to the "
Modifying Layers On
Program
" section on page 306 for details.
•
Live Switch Program/Preview Mode
is enabled. Refer to the "
Using Live
Switch Program/Preview Mode
" section on page 317 for details.
•
Live Switch Source Mode
is enabled. Refer to the "
Using Live Switch
Program/Preview Mode
" section on page 317 for details.
jáñ
A Mix (or Dissolve) can be performed on both single screen and widescreen destinations.
Use the following steps to perform a
Mix
:
1.
Set up the desired “look” in Preview.
2.
Preset the mode and transition rate:
a.
In the
System Keypad
, press
EFFECTS
to display the
Effects Menu
.
b.
Adjust the
Transition Rate
field, in 0.1 second increments.
c.
In the
Transition Type
field, select
Mix
.
3.
In the
Transition Section
, press
AUTO TRANS
to dissolve the setup to Program.
Cut
Auto
Trans
Summary of Contents for Encore
