![background image](http://html1.mh-extra.com/html/barco/encore/encore_manual_3871756297.webp)
Encore Presentation System • User’s Guide
297
7. Operations
Working with Layers
tçêâáåÖ=ïáíÜ=i~óÉêë
The following topics are discussed in this section:
•
Switching Sources
•
Background Transitions
•
Understanding Split and Mix Modes
•
Working with PIPs in Split Mode
•
Working with PIPs in Mix Mode
•
Modifying PIPs
•
Working with Keys in Split Mode
•
Working with Keys in Mix Mode
•
Using Cut & Fill
•
Modifying Keys
•
Clearing Layers from Program
•
Modifying Layers On Program
pïáíÅÜáåÖ=pçìêÅÉë
The following sources are available:
•
On the Controller SC, 24 sources are available.
•
On the Controller LC, 64 sources are available.
Use the following steps to switch sources into a PIP or a Key:
1.
Select a destination that is
not
an Aux destination.
2.
Select a layer button (in the
Layer Control Section
). Ensure that it is blinking.
3.
Select
PIP
or
Key
as desired.
4.
Press the desired button on the
Source Selection Bus
to assign that source to
the PIP or Key.
~
On the
Controller SC
, sources 1 - 12 are accessed directly. Press and
light the
Shift
button to access sources 13 - 24.
~
On the
Controller LC
, sources 1 - 32 are accessed directly. Press and
light the
Shift
button to access sources 33 - 64.
The source button blinks to indicate that it is selected and active for modification.
Please note the following points regarding sources:
•
The
Shift
button on the
Source Selection Bus
is a toggle. It stays lit until
pressed again.
•
When the
Red LED
above a source button is lit, the source is on Program.
•
When a source button is lit solid, the source is on Preview — but it is not active for
manipulation. Only blinking source buttons are active for modification.
•
Multiple sources can appear on Program and Preview simultaneously, but only
one button can be blinking and active for modification on Preview.
Summary of Contents for Encore
