![Barco Encore Manual Download Page 300](http://html1.mh-extra.com/html/barco/encore/encore_manual_3871756300.webp)
300
Encore Presentation System • User’s Guide
7. Operations
Working with Layers
~
With
Toggle
off, the source selected in Preview
stays
in Preview, once
the transition is complete. Here, sources must be changed manually.
Please note the following important points regarding
Mix Mode
:
•
When neither layer is on Program, if you select one layer, the other is
automatically de-selected. Only one layer can be active at a time.
•
Four transition combinations are possible:
~
Mix Source
with or without
Toggle
.
~
Swap
with or without
Toggle
.
tçêâáåÖ=ïáíÜ=mfmë=áå=péäáí=jçÇÉ
In
Split Mode
, a mixer’s two layers operate
independently
.
Use the following steps to work with PIPs in
Split Mode
.
1.
On the
Destination Bus
, select the desired destination(s).
2.
In the
Layer Control Section
, press the desired layer button:
~
The layer button blinks, and in the
Source Selection Bus
, the source
assigned to the layer blinks.
~
On Preview, the raster box for the selected layer blinks (even if it is
hidden under another layer).
3.
Turn the
Split
button
ON
.
4.
In the
Layer Function Section
, press
PIP
to display the
PIP Adjustment Menu
.
5.
On the
Source Selections Bus
, select the desired source. The button blinks to
indicate that it is active, and the source appears within the PIP on Preview.
6.
Adjust the PIP’s size, position, border, shadow and effects as desired. Refer to
the “
Modifying PIPs
" section on page 301 for details.
7.
Press
Source
to display the
Input Source Adjustment Menu
. Adjust the
source’s size and position within the PIP if required.
8.
Prior to the transition, set up additional PIPs and Keys as desired.
9.
Transition the setup to Program.
10.
Repeat the procedure from step
1
for the next transition.
Please note:
•
If a mixer is in "Split Mode" and a Layer is active for modification, pressing
Mix
Source
or
Swap
places the mixer in
Mix Mode
, and automatically turns the
Split
button off. Please note:
~
The layer selected on Preview remains selected, and if a layer is
currently on Program, it remains on air.
~
If both layers are active on Program, Mix Mode cannot be enabled.
•
If a mixer is in
Mix Mode
, pressing
Split
automatically cancels the current mode
and turns off either the
Mix Source
or
Swap
button.
Note
If the PIP in Preview has a different source than the PIP in
Program, the moment
Toggle
is turned off, the PIP in Preview
automatically changes its source to match Program.
Summary of Contents for Encore
