Barco Encore, Manual

Page: 175 / 404

Encore Presentation System • User’s Guide 175
5. Menu Orientation
System Menu
•
Number of Inputs — identifies the number of inputs on the selected router.
•
Number of Outputs — identifies the number of outputs on the selected router.
•
Communication Type — sets the router’s communication type, either RS-232 ,
ETHERNET or LANTRONIX .
•
Press
{
COMM SETUP
}
to display one of three Comm Setup Menus , depending
on the selected Communication Type . Refer to the “ Comm Setup Menus ”
section on page 175 for details.
•
Press
{
DELETE ROUTER
}
to change the selected router Number to undefined.
•
Press
{
ADD NEW
}
after choosing an “ EMPTY ” router number to begin the
definition process — in order to create a valid router specification.
•
Press
{
OUTPUT PATCH
}
to display the Output Patch Menu . Refer to the
“ Output Patch Menu ” section on page 178 for details.
`çãã=pÉíìé=jÉåìë
Information is provided for three different Comm Setup Menus:
•
Ethernet Setup Menu
•
RS-232 Setup Menu
•
Lantronix Setup Menu
Ethernet Setup Menu
On the Router Specification Menu , when Communication Type is set to ETHERNET ,
press
{
COMM SETUP
}
to display the Ethernet Setup Menu :
Figure 5-30. Ethernet Setup Menu (sample)
The Ethernet Setup Menu enables you to set the router’s IP address and port number.
•
IP Address — sets the router’s IP address.
•
IP Port Number — sets the router’s IP port number, if applicable.
•
Press
{
NEXT IP QUAD
}
to advance to the next 3-digit set of numbers in the
address. Use the ADJ knob in the normal manner to change the digits.
B
A
C
K
N
A
V
A
D
J
ETHERNET SETUP
IP Address 192.168.0.241
NEXT
IP QUAD
23 IP Port Number
TEST
COMM