![background image](http://html1.mh-extra.com/html/barco/encore/encore_manual_3871756206.webp)
206
Encore Presentation System • User’s Guide
5. Menu Orientation
Key Menu
•
Blue Color
— adjusts the blue component of the key color, from 0 to 1024.
•
Red Threshold
— adjusts the key’s clip along the Cyan vector (as demonstrated
using a CIE color chip chart).
•
Green Threshold
— adjusts the key’s clip along the Magenta vector.
•
Blue Threshold
— adjusts the key’s clip along the Yellow vector
•
Red Mask
— adjusts the background mask to/from black along the Cyan vector.
•
Green Mask
— adjusts background mask to/from black along the Magenta vector.
•
Blue Mask
— adjusts background mask to/from black along the Yellow vector.
•
Opacity
— adjusts the opacity of the keyed image, from fully opaque to fully
transparent.
~
Adjustment range
: 0 to 1024
•
Press
{
STATS
}
to display the
Status Menu
. Refer to the “
Status Menu
” section
on page 193 for details.
•
Press
{
CLONE
}
to display the
Clone Setup Menu
(if
Clone
is enabled). Refer to
the “
Clone Setup Menu
” section on page 197 for details
•
Press
{
EFX
}
to display the
Image Effects Menu
. Refer to the “
Image Effects
Menu
” section on page 201 for details.
•
Press
{
PICK COLOR
}
to choose the keying color visually. Once pressed, the
{
GRAB COLOR
} label appears, and a crosshair appears on Preview. Use the
Joystick to move the crosshair around the Preview monitor as desired.
•
Press {
GRAB COLOR
} to select the color directly under the crosshair. These
values are immediately mapped into the
Red
,
Green
and
Blue
color fields on the
menu, and can be adjusted with the knobs in the normal manner.
•
Press
{
SIZE & POS
}
to display the
Key Adjustment Menu
. Refer to the “
Key
Adjustment Menu
” section on page 208 for details.
`ìí=H=cáää=hÉó=cìåÅíáçåë
A
Cut + Fill
key is one in which the hole-cutting information is provided by a Luma Key on
a mixer’s B layer, and the fill information is provided by the same mixer’s A layer.
The following
Key Menu
functions are provided when
Cut + Fill
key is selected:
•
Invert Mode
— enables you to invert the “Cut” key signal.
•
Clip
— adjusts the threshold of the video that “cuts” into the background. The
hole is filled with the
Fill Source
from Layer A.
~
Adjustment range
: 0 to 1023
•
Gain
— adjusts the sensitivity of the keyer, enabling you to change the sharpness
of the image. Gain only affects the key hole.
~
Adjustment range
: 0 to 1023.99
•
Opacity
— enables you to adjust the opacity of the keyed image, from fully
opaque to fully transparent.
~
Adjustment range
: 0 to 1024
Note
Cut + Fill
keys can only be selected on a mixer’s Layer B
keyer, in the
Split
mode only.
Summary of Contents for Encore
