![background image](http://html1.mh-extra.com/html/barco/encore/encore_manual_3871756274.webp)
274
Encore Presentation System • User’s Guide
6. System Setup
DSK Setup
fåéìí=pÉíìé=kçíÉë
You
do not
have to repeat the input setup procedure for other destinations if either of the
following criteria are met:
•
Your other destinations use sources that are patched to the same router.
•
Your other destinations are configured using the “
ALL SP
” function on the
Input
Source Patch Menu
.
In this case, all other system destinations will automatically receive input configuration files
via the system’s “copy down” functionality.
You
do
have to repeat the input setup procedure if either of the following criteria are met:
•
Your other destinations use a different router.
•
Your other destinations use unique input patching.
aph=pÉíìé
Encore system setup:
Step 18
S
Prerequisites
— Ensure that you are familiar with the following menus:
~
DSK Adjustment Menu
. In Chapter 5, refer to the “
DSK Adjustment
Menu
” section on page 234.
~
DSK Input Setup Menu
. In Chapter 5, refer to the “
DSK Input Setup
Menu
” section on page 237.
In this procedure, you will set up the Controller’s
DSK
source. An Encore DSK can be
configured as a DVI input, an analog input, a frame grab or “none.”
Please note the following important points:
•
For ScreenPRO-II destinations, remember that
BG B
and the
DSK
are mutually
exclusive. This occurs because the
BG/DSK Input B
is
shared
between the
DSK
and
BG B
on all individual ScreenPRO-II units.
•
For single or wide screen Encore systems using single M/E Video Processors,
there are only two DVI input connectors available (
1A
and
1B
). In this
configuration, you can not set up both backgrounds and the DSK — you can only
configure two of the three (e.g., both backgrounds, or one background plus DSK).
•
For stack configurations, remember that the background sources connect to the
“bottom” stack Processor, while DSK sources connect to the “top” stack.
Use the following steps to set up your DSK source:
1.
On the Controller, press
DSK
to display the
DSK Adjustment Menu
.
2.
Press {
INPUT SETUP
} to display the
DSK Input Setup Menu
.
3.
On the
Destination
line, select the destination on which you want to set up the
downstream key.
~
If multiple destinations are active, select the desired destination.
~
If a single destination is active, selections cannot be made.
4.
On the
ID
line, select the IDs of the Processor(s) for which you want set up the
downstream key.
~
For single screen destinations, ID selections cannot be made.
18
Summary of Contents for Encore
