Altigen AltiContact Manager Version 4.6, Administration Manual

Page: 72 / 576

2-8 AltiContact Manager Administration Manual
Triton Resource Board
The Triton Resource board enables call center supervisors to barge in or
silently monitor conversations. Up to two Resource Boards can be installed
in one system. Up to 12 simultaneous supervisor silent monitoring or
barge-in sessions are supported for each board.
The Triton Resource board has the following functional characteristics:
• MVIP Compatible
• Jumper-Free Configuration
• 12 ports for silent monitoring and barge-in
• PCI Bus
AltiGen Board Installation
Always install Triton and Quantum boards and attach MVIP and power
cables prior to powering server on. Failure to do so may result in damage
to the board. When removing or connecting the MVIP cable, do so with a
slow, vertical motion. Do not use a side-to-side rocking motion to remove
the connector or by pulling the cable. Be careful to make sure pins in the
MVIP connector on the board line up with the sockets on the MVIP cable.
Failure to do so may result in pins being pushed down toward the bottom
of the MVIP connector on the board. The MVIP test will detect these errors.
For complete instructions on how to install Triton and Quantum boards,
please refer to the Quick Installation Guide, which is provided with every
AltiGen board package.
TritonDef.inf
When a new PCI board is installed in a Windows 2000 system, the OS will
detect the board and ask for a driver. The driver file for the boards
(TritonDef.inf) can be found in the following locations:
• Before installing AltiContact Manager: on the root directory of the
AltiContact Manager CD-ROM; this file will be installed when you
install the software.
• After installing AltiContact Manager: in the \AltiServ\SP directory on
your hard drive.