Altigen AltiContact Manager Version 4.6, Administration Manual

Page: 189 / 576

Board Configuration
AltiContact Manager Administration Manual 6-15
6.
B
o
a
rd
Configur
a
tion
Note: AltiContact Manager can configure any channel in a PRI span
to be the D channel. The default setting is the last channel.
Every span should select a D channel within the span. Shared
D channel (NFAS) or back up D channel is not supported.
Hunting: Most Idle, Least Idle, Ascend, Descend
DNIS Digits: can be 3 to 10 digits
CSU/DSU Requirements
The CSU (channel service unit) is a device used to connect a digital trunk
line coming in from the phone company to the PBX. A CSU can terminate
signals, repeat signals, and respond to loopback commands sent from the
central office.
Board Configuration
Double click the board’s icon in the Boards window (see Figure 1) to open
the Board Configuration window.
Figure 7. Board Configuration window (Triton T1/PRI Board)
The Board Configuration window for the Triton T1/PRI board displays
the same options as the Triton Analog Station board, which is discussed in
“Configuring the Triton Analog Station Board” on page 6-4, but there are
additional options available. The Board ID must be in the range 0–7.