Altigen AltiContact Manager Version 4.6, Administration Manual

Page: 300 / 576

Setting up Extensions
13-10 AltiContact Manager Administration Manual
Setting the Line Properties
For a physical extension, you can configure hardware options on the board
port used for the extensions. To do so, select the extension number in the
list of extensions, then click the Line Properties button to open a dialog
box that is specific to the board using for the extension.
The Line Properties are somewhat different for Quantum Board than for
Triton Analog Station Boards. The subsequent sections deal first with
Quantum, then with Triton Analog Station.
Quantum Line Properties
If you select a Quantum board extension and click Line Properties, you’ll
see the Quantum Line Properties dialog box. Note that you can use the
Apply to… button to apply these hardware settings to one, some, or all
ports on the board. Using Apply to… is discussed in “Apply To Button” on
page 13-2.
Figure 3. Quantum Line Properties dialog box for extensions