Altigen AltiContact Manager Version 4.6, Administration Manual

Page: 204 / 576

7-2 AltiContact Manager Administration Manual
Figure 2. General window, Trunk Configuration
Selecting Trunks to Set Attributes
The title bar of the Trunk Configuration window displays the card and the
channel of the selected trunk.
The list on the left shows all the configured trunks. The location format is
the same as in the Trunk View window, that is, slot:channel—for example,
channel 15 on the board in slot 1 is location 01:15.
When you select a trunk in this list, the options and parameters for the trunk
appear in the settings in the right of the window.
Configuring One or Multiple Trunks
To customize trunk characteristics, you work on one trunk at a time. To
apply the same configuration to multiple trunks, use the Apply To…
button. This pops up a list of all trunks, with all of the trunks selected by
default. Deselect the trunks you don’t want to apply changes to, then click
OK. (Note that you cannot use the mouse to drag over and select multiple
items; you must use the Shift and Ctrl keys.) This applies changes to
multiple trunks for only the attribute or option that you changed.