Altigen AltiContact Manager Version 4.6 Administration Manual Download Page 424

Page: 424 / 576

21-24

AltiContact Manager Administration Manual

Enable the Exchange Integration feature in ACM
Administrator

In ACM Administrator, select Voice Mail Configuration from the
System Management menu.

Select the Messaging tab, and under the E-mail Messaging Options,
check the Synchronize with Exchange Server box only.

Figure 19.

Messaging window, Voice Mail Configuration

Enter the name of the Exchange Server (e.g. MAILSERVER) in the
space provided and click Apply.

This completes the configuration for the Exchange Integration feature.

Summary of Contents for AltiContact Manager Version 4.6

































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for AltiContact Manager Version 4.6

Reviews:

Brands by name

Popular brands

Altigen AltiContact Manager Version 4.6, Administration Manual

Search results

Summary of Contents for AltiContact Manager Version 4.6

Reviews:

Brands by name

Popular brands