ACS contsys RCE 300 Manual Download Page 9

Page: 9 / 152

ACS-CONTROL-SYSTEM GmbH

l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]

Universal Data Manager

Installation

• Optional: Industrial grade SD card (card is located in the device)

• Analysis software on CD-ROM

• Configuration software on DVD

• Delivery note

• Multilingual Brief Operating Instructions as hard copy

• Multilanguage Operating Instructions on CD–ROM

Anything missing? Then please inform your supplier.

4.2

Product identification

4.2.1

Nameplate

Compare the nameplate with the following diagram:

3
4
5

35 VA

A0020253

 1

Device nameplate (example)

Device designation

Serial number

Power supply, mains frequency

Power consumption

Temperature range

Software version; MAC address

Device approvals

4.3

Storage and transport

Compliance with the permitted environmental and storage conditions is mandatory.

Precise specifications are provided in the "Technical data" section of the Operating

Instructions. (→  54)
Please note the following:

• Pack the device so that is protected against impact for storage and transport. The

original packaging provides optimum protection.

• The permitted storage temperature is –20 to +60 °C (–4 to +140 °F).

Installation

5.1

Mounting requirements

NOTICE

Overheating due to buildup of heat in the device

‣

To avoid heat buildup, please always ensure that the device is sufficiently cooled.

The device is designed for use in a panel in non-hazardous areas.

Summary of Contents for RCE 300

























































































































































Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands

ACS contsys RCE 300, Manual

Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands