ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
26
Operation options
Universal Data Manager
26
Item
No.
Function
Description
"Maintenance required"
Maintenance is required. The measured value is still valid.
Error message "Failure detected"
An operating error has occurred. The measured value is no longer valid (e.g.
a channel not displayed in the current group is defective).
"External communication"
The device is communicating externally (e.g. via Modbus).
SIM
"Simulation"
Simulation is active.
7.3.2
Symbols in operating menus
Symbol for setup
Symbol for expert setup
Symbol for diagnostics
Back
Use the "Back" function, which can be found at the bottom of each menu/submenu, to move up
a level in the menu structure.
To quit the menu immediately, press and hold "Back" (>3 sec.) in the Navigator. The
devices switches to Display mode.
7.3.3
Entering text and numbers (virtual keyboard)
A virtual keyboard is available for entering text and numbers. This is opened automatically
if needed. Here, turn the navigator to select the corresponding character and press the
navigator to accept it.
The following characters are available for entering free text:
0-9 a-z A-Z = + - * / \
23
¼ ½ ¾ ( ) [ ] < > { } I ? ! ` " ' ^ % ° . , : _ µ & # $ € @ § £ ¥ ~
←
Jump one position to the left.
If this symbol is selected, the cursor jumps one position to the left.
→
Jump one position to the right.
If this symbol is selected, the cursor jumps one position to the right.
← x
Delete backwards.
If this symbol is selected, the character to the left of the cursor position is deleted.
x→
Delete forwards.
If this symbol is selected, the character to the right of the cursor position is deleted.
Delete all.
if this symbol is selected, the entire entry is deleted.
Reject entry.
If this symbol is selected, the entry is rejected and you quit editing mode. The previously set text
remains.
Accept entry.
If this symbol is selected, the entry is applied at the position specified by the user, and you quit
editing mode.
7.3.4
Channel color assignment
Channel color assignment is performed in the main menu under
"Setup -> Advanced
setup -> Application -> Signal groups -> Group x"
. 8 predefined colors are available per
group and can be assigned to the desired channels.
