ACS contsys RCE 300 Manual Download Page 38

Page: 38 / 152

ACS-CONTROL-SYSTEM GmbH

l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]

Operation

Universal Data Manager

Activation of web server in the menu

Setup

→

Advanced

setup

→

Communication

→

Ethernet

→

Web server

→

Yes

or the menu

Expert

→

Communication

→

Ethernet

→

Web server

→

Yes

The web server port is preset to 80. The port can be changed in the

Expert

→

Communication

→

Ethernet

menu.

If the network is protected by a firewall, the port may need to be activated.

The following web browsers are supported:

• MS Internet Explorer 8 and higher (in order to utilize the full functionality of the web

server using the latest version of Internet Explorer is recommended)

• Mozilla Firefox 15 and higher

• Opera 12.x and higher

• Google Chrome 23.x and higher

To configure the device via a web server, you must have Administrator or Service

access. Prior to accessing the web server, create an ID and password in the main menu

under

"Setup -> Advanced setup -> Communication -> Ethernet -> Configuration

Web server -> Authentication"

ID default value: admin; Password: admin
Note: The password should be changed during commissioning!

Data can be exported via the web server in HTML or XML format.

10.4.1 Access to the web server via HTTP (HTML)

When using an internet browser, you just need to enter the address

http://<ip-address>

to have the HTML view displayed in the browser.

Note: Leading zeros in IP addresses must not be entered (e.g. enter 192.168.1.11

instead of 192.168.001.011).

As in the case of the display, you can alternate between the display groups in the web

server. The measured values are updated automatically (directly via "link": off/5s/15s/30s/

60s). In addition to the measured values, status and limit value flags are displayed.

10.4.2 Access to the web server via XML

XML format is available in addition to HTML format and contains all measured values of a

group. This can be integrated into additional systems as the user wishes.
The XML file is available in ISO-8859-1 (Latin-1) coding at

http://<ip-address>/

values.xml

(alternative:

http://<ip-address>/xml

). However, some special characters,

such as the Euro symbol, cannot be displayed in this file. Texts such as digital statuses are

not transmitted.

Note: Leading zeros in IP addresses must not be entered (e.g. enter 192.168.1.11

instead of 192.168.001.011).
The decimal point is always displayed as a period in the XML file. Also, all times are

given in UTC The time difference in minutes is noted in the following entry.

Summary of Contents for RCE 300

























































































































































Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands

ACS contsys RCE 300, Manual

Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands