ACS contsys RCE 300 Manual Download Page 78

Page: 78 / 152

ACS-CONTROL-SYSTEM GmbH

l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]

Anhang

Universal Data Manager

Navigation

Expert → System → External memory → Memory build-up

Direct access code: 140001-000

Description

"Stack memory": no more data can be stored once the data carrier is full.

"Ring memory": once the data carrier is full the oldest data is deleted so that new data can

be stored (First in first out (FIFO).

Options

Stack memory, Ring memory (FIFO)

Factory setting

Stack memory

Warning at

Navigation

Expert → System → External memory → Warning at

Direct access code: 140005-000

Description

Issues a warning before the data carrier is x% full.

A warning is indicated on the device and this is also stored in the event buffer.

A relay can also be switched.

Only for external SD card (does not apply to USB stick)!

User entry

0 to 99%

Factory setting

Switches relay

Navigation

Expert → System → External memory → Switches relay

Direct access code: 140006-000

Description

When the warning "Data carrier full" is displayed a relay can also be switched on.

Options

Not used, Relay x

All the available relays are displayed.

Factory setting

Not used

CSV settings

Also configurable if "Protected format" is set.

Separator for CSV

Summary of Contents for RCE 300

























































































































































Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands

ACS contsys RCE 300, Manual

Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands