ACS contsys RCE 300 Manual Download Page 73

Page: 73 / 152

ACS-CONTROL-SYSTEM GmbH

l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]

Universal Data Manager

Anhang

Factory setting

March

Date

Navigation

Expert → System → Date/time set-up → NT/ST changeover → Date

Direct access code: 110008-000

Description

Date next spring when a change from normal to summer time occurs.

Only visible if NT/ST changeover = automatic or manual. Cannot be edited.

Time

Navigation

Expert → System →Date/time set-up → NT/ST changeover → Time

Direct access code: 110009-000

Description

Time when the time is moved forward by 1 hour on the day of the changeover from

normal time to summer time (in the set time format).

Visible for NT/ST changeover = Automatic or Manual. Only editable if NT/ST changeover =

Manual.

User entry

Time in set time format

Factory setting

02:00

End summer time

Occurrence

Navigation

Expert → System → Date/time set-up → NT/ST changeover → Occurrence

Direct access code: 110005-000

Description

Day, when in the autumn a change from summer to normal time occurs.

Visible for NT/ST changeover = Automatic or Manual. Only editable if NT/ST changeover =

Manual.

Options

1st, 2nd, 3rd, 4th, Last

Factory setting

Last

Day

Summary of Contents for RCE 300

























































































































































Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands

ACS contsys RCE 300, Manual

Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands