ACS contsys RCE 300 Manual Download Page 122

Page: 122 / 152

ACS-CONTROL-SYSTEM GmbH

l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]

122

Anhang

Universal Data Manager

122

Formula editor

Enter the desired calculation formula. The formula can be any combination of arithmetic

calculations and logical operations. Analog, digital or already active mathematics channels

can be used.

Formula editor

Navigation

Expert → Application → Maths → Maths x → Formula

Direct access code: 400002-000

x = place holder for selected mathematics channel

A text field with the formula currently used appears. If the field is empty a formula

has not yet been defined for the mathematics channel.

Description

Individual channels can be mathematically linked and calculated with functions. The

mathematics channels calculated in this way are treated as "real" channels, regardless of

whether they are connected conventionally or via fieldbus. Enter the desired calculation

formula. The formula can be any combination of arithmetic calculations and logical

operations. Analog and digital channels can be used, as can mathematics channels that are

already active.

A formula with up to 200 characters can be created using this editor. If the formula is

finished, click OK to close the editor and accept the formula entered. The common entry

and arithmetic operators and inputs are described in detail in the following sections.

Inputs

Inputs are described in the formula using the following syntax:

Input type (signal type;channel number)

Input types:

Type

Description

Analog inputs

Digital inputs

Mathematics inputs

Signal type:

Type

Description

Instantaneous value (measured value)

State

Counter/operational time

Validity:

The status of an analog channel or a mathematics channel is relayed.
The relayed value of the function is 0 if:

• The "Cable open circuit" flag is set

• The "Invalid meas. val." flag is set
However the value is not 0 if:

• The "Error value" flag is set

• The "Over range" or "Under range" flag is set

• The "No value available" flag is set

• Limit value flags are set

Summary of Contents for RCE 300

























































































































































Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands

ACS contsys RCE 300, Manual

Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands