ACS contsys RCE 300 Manual Download Page 144

Page: 144 / 152

ACS-CONTROL-SYSTEM GmbH

l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]

144

Anhang

Universal Data Manager

144

Description

Displays the order code.

The order code indicates the attribute of all the features of the product structure for the

device and thus uniquely identifies the device. It can also be found on the nameplate.

Uses of the order code

• To order an identical spare device.

• To check the ordered device features using the delivery note.

Firmware Version

Navigation

Expert → Diagnostics → Device information → Firmware version

Direct access code: 000026-000

Description

Displays the installed firmware version of the device. Please send these details with any

questions about the unit.

ENP version

Navigation

Expert → Diagnostics → Device information → ENP version

Direct access code: 000032-000

Description

Displays the version of the electronic nameplate. Please send these details with any

questions about the unit.

ENP device name

Navigation

Expert → Diagnostics → Device information → ENP device name

Direct access code: 000020-000

Description

Displays the ENP device name (electronic name plate). Please send these details with any

questions about the unit.

Device name

Navigation

Expert → Diagnostics → Device information → Device name

Direct access code: 000021-000

Description

Displays the device name. Please send these details with any questions about the unit.

Manufacturer ID

Summary of Contents for RCE 300

























































































































































Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands

ACS contsys RCE 300, Manual

Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands