ACS contsys RCE 300, Manual

Page: 88 / 152

ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de
88
Anhang Universal Data Manager
88
Factory setting 1000
Meas. range end
Navigation Expert → Inputs → Universal inputs → Universal input x → Meas. range end
Direct access code: 220006-0xx
Examples: Universal input 1: 220007-000; Universal input 12: 220007-011
Description Transmitters convert the physical measured variable to standardized signals. Enter the end
of the measuring range here.
• The start and end of the measuring range may not be identical.
• The end of the measuring range can also be smaller than the start (e.g. for deep
wells).
• The parameter can be defined independently of the number of decimal places
configured for the measured value as these are only taken into consideration for the
display.
User entry Number (max. 8 digits)
Factory setting Depends on the input signal selected
Zoom start
Navigation Expert → Inputs → Universal inputs → Universal input x → Zoom start
Direct access code: 220011-0xx
Examples: Universal input 1: 220011-000; Universal input 12: 220011-011
Description Transmitters convert the physical measured variable to standardized signals. Enter the
start of the zoom range here.
• The zoom can also be set outside the measuring range. The only restriction is that
the start and end of the zoom may not be identical.
• If the signal or the range is changed, the zoom is corrected if it no longer fits the
measuring range.
• The zoom start can also be larger than the zoom end. The device will automatically
rotate the values on the display.
User entry Number (max. 8 digits)
Factory setting Depends on the input signal selected
Zoom end
Navigation Expert → Inputs → Universal inputs → Universal input x → Zoom end
Direct access code: 220012-0xx
Examples: Universal input 1: 220012-000; Universal input 12: 220012-011