ACS contsys RCE 300, Manual

Page: 139 / 152

ACS-CONTROL-SYSTEM GmbH l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l info@acs-controlsystem.de
139
Universal Data Manager Anhang
139
Description Contains settings required if alarms are to be transmitted by e-mail.
Test the e-mail settings under Diagnostics → Simulation → E-mail.
SMTP host
Navigation Expert → Application → E-mail → SMTP host
Direct access code: 510062-000
Description Enter your SMTP host here. If necessary, contact your network administrator or e-mail
provider.
Currently, only providers that do not require encryption by TLS/SSL are supported.
User entry Text (max. 40 characters)
Port
Navigation Expert → Application → E-mail → Port
Direct access code: 510063-000
Description Enter your SMTP port here. If necessary, contact your network administrator or e-mail
provider.
User entry Number (max. 4 digits)
Factory setting 25
Sender
Navigation Expert → Application → E-mail → Sender
Direct access code: 510064-000
Description Enter the e-mail address of the device here (this text appears as the sender of the e-mail).
If necessary, contact your network administrator or e-mail provider.
If a valid e-mail address is not configured this might cause e-mail transmission
problems, depending on the particular provider.
User entry Text (max. 60 characters)
User name