ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
97
Universal Data Manager
Anhang
97
Description
Configure what value the device should continue working with (for calculations) if the
measured value is not valid (e.g. cable open circuit).
In the event of an error value, all the dependent calculations are flagged accordingly
as "error value". Counters are not flagged, however!
Options
Invalid calculation, Error value
Factory setting
Invalid calculation
Error value
Navigation
Expert → Inputs → Universal inputs → Universal input x → Fault mode → Error value
Direct access code: 220062-0xx
Examples: Universal input 1: 220062-000; Universal input 12: 220062-011
Description
The device continues calculating with this value in the event of an error.
Only visible if on error = error value
User entry
Number (max. 8 digits)
Factory setting
0
Save event
Navigation
Expert → Inputs → Universal inputs → Universal input x → Fault mode → Save event
Direct access code: 220063-0xx
Examples: Universal input 1: 220063-000; Universal input 12: 220063-011
Description
Stores a message in the event log when a fault occurs.
Options
No, Yes
Factory setting
No
Submenu "Digital inputs -> Digital input x"
Navigation
Expert → Inputs → Digital inputs → Digital input x
Description
Setting up only required if the digital inputs (e.g. events) are to be used.
x = place holder for selected digital input
Function
