ACS contsys RCE 300 Manual Download Page 80

Page: 80 / 152

ACS-CONTROL-SYSTEM GmbH

l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]

Anhang

Universal Data Manager

Description

The time the message is acknowledged can be saved in the events list.

Options

Do not save, Save

Factory setting

Do not save

Switches relay

Navigation

Expert → System → Messages → Switches relay

Direct access code: 100042-000

Description

A relay can be switched as soon as a message that has to be confirmed is displayed (e.g.

on/off message, device errors etc.).

The relay is switched until the message is acknowledged.

Options

Not used, Relay x

All the available relays are displayed.

Factory setting

Not used

"Screen saver" submenu

Navigation

Expert → System → Screen saver

Description

To increase the life span of the LCDs the rear illumination can be switched off (= screen

saver).

Screen saver

Navigation

Expert → System → Screen saver → Screen saver

Direct access code: 160000-000

Description

"Switched off": LCD is always switched on.

“Switch on for x min.”: display goes dark after x minutes. All other functions remain in

operation. Press an operating key: Illumination is switched back on.

"Switch daily": Enter time span.

Options

Switched off, On after 10 min., On after 30 min., On after 60 min., Switched daily

Factory setting

Switched off

This setting has no effect if the screen saver is controlled by a digital input (→  100).

ON daily from

Summary of Contents for RCE 300

























































































































































Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands

ACS contsys RCE 300, Manual

Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands