ACS contsys RCE 300 Manual Download Page 82

Page: 82 / 152

ACS-CONTROL-SYSTEM GmbH

l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]

Anhang

Universal Data Manager

Activation code

Navigation

Expert → System → Device options → Activation code

Direct access code: 000057-000

Description

Here, you can enter a code to enable the device options.

Note: When an activation code is entered, the device is restarted in order to enable the

new option.

• The activation code entered is not displayed, i.e. this parameter is always empty

following a restart.

• Pay attention to case-sensitivity.

User entry

Text

Slot 1

Navigation

Expert → System → Device options → Slot 1

Direct access code: 990000-000

Description

Hardware and software options.

Cannot be edited.

The assignment can be specified in the PC operating software for offline

configuration.

Options

Not assigned, Universal inputs

Factory setting

Not assigned

Slot 2

Navigation

Expert → System → Device options → Slot 2

Direct access code: 990001-000

Description

Hardware and software options.

Cannot be edited.

The assignment can be specified in the PC operating software for offline

configuration.

Options

Not assigned, Universal inputs

Factory setting

Not assigned

Slot 3

Summary of Contents for RCE 300

























































































































































Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands

ACS contsys RCE 300, Manual

Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands