ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
40
Operation
Universal Data Manager
40
Only the
active
groups are displayed here. The settings for this can be made in the
main menu under
"Setup -> Advanced setup -> Application -> Signal groups ->
Group x"
.
10.7 SD card / USB stick
You can find functions to save measured data and device settings on a removable medium
in the main menu under
"Operation -> SD card / USB stick"
(only if an SD card or USB
stick is provided).
Remove safely:
All internal access is terminated to ensure safe removal of the storage medium from the
device. You are notified when it is safe to remove the data storage medium. 5 minutes
after the message, the device automatically saves data on the storage medium again.
Only remove the data storage medium using this function; otherwise data may be
lost!
Update:
Measurement data not yet saved on the storage medium are now saved. Please be patient!
Measured value acquisition is running in parallel and has top priority.
Data from several devices can be saved onto one storage medium.
•
Save measured values:
A user-definable time range can be saved on the data storage medium.
•
Load setup:
Loads device settings (setup) from the storage medium onto the device.
•
Save setup:
All device settings (setup) are saved onto the storage medium. They can be archived or
used for other devices.
•
Screenshot:
Save the current measured value display as a bitmap on the SD card or USB stick.
•
Update firmware:
Loads new firmware onto the device. Only visible if a firmware file is provided on the SD
card or USB stick.
Caution: The device will restart. Save the setup and measured values beforehand on
the SD card or USB stick.
10.8 Showing data logging
You can scroll through the saved measured values in the main menu under
"Operation ->
History"
. Turn the navigator clockwise or counterclockwise to scroll back and forth
between the measured value curves. Press the navigator to make other settings for the
historical data display (e.g. scroll speed, zoom factor or change display mode) or quit the
historical data function.
The gray header on the screen indicates that historical values are being displayed (this
header is blue during instantaneous value display).
10.9 Signal analysis
The analyses saved in the device are displayed in the main menu under
"Operation ->
Signal analysis"
.
