ACS contsys RCE 300 Manual Download Page 65

Page: 65 / 152

ACS-CONTROL-SYSTEM GmbH

l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]

Universal Data Manager

Technical Data

OPC server

(optional)

The following momentary values can be provided:

• Analog channels

• Digital channels

• Mathematics

• Totalizer

RS232/RS485, USB,

Ethernet

Configuration

software (included

in scope of supply)

• Device configuration

• Loading and saving device data (upload/download)

• Documentation of the measuring point

USB, Ethernet

System integration

The device has (optional) fieldbus interfaces for exporting process values. Measured values

and statuses can also be transmitted to the device via fieldbus. Depending on the bus

system, alarms or faults occurring during data transmission are displayed (e.g. status

byte). The process values are transferred in the same devices that are used for display at

the device.

Ethernet

The following functions are implemented:

• Data communication with PC software (analysis software, configuration software, OPC

server)

• Web server

Modbus RTU/TCP slave

The device can be connected to a Modbus system via RS485 or Ethernet interface. Up to 12

analog inputs and 6 digital inputs can be transmitted via Modbus and stored in the device.

15.10 Certificates and approvals

 mark

Declaration of Conformity

The product meets the requirements of the harmonized European standards. As such, it

complies with the legal specifications of the EC directives. The manufacturer confirms

successful testing of the product by affixing to it the  mark.

Approvals

CSA GP
UL-listed

Other standards and

guidelines

• IEC 60529:

Degrees of protection provided by enclosures (IP code)

• IEC 61010-1: 2001 Cor 2003

Safety requirements for electrical equipment for measurement, control and laboratory

use

15.11 Ordering information

Scope of delivery

The scope of delivery of the device comprises:

• Device (with terminals, as per your order)

• 2 fastening clips

• USB cable

• Optional: Industrial grade SD card (card is located in the device).

• Analysis software on CD-ROM

• Configuration software on DVD

Summary of Contents for RCE 300

























































































































































Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands

ACS contsys RCE 300, Manual

Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands