NOTICE
Important Safety Instructions for the 6100 Series
Note:
Before you start working with your 6100 device, you need to first read the important safety information provided in
this notice. This document provides information that may supplement or add safety information to the user guide of your
product. Keep this information close at hand. You can obtain a copy of the complete user guide for your product at the
following link:
www.radiodetection.com
.
Note:
The 6100 enclosure may become warm during normal use.
Introducing the 6100 Series
The 6100 is a handheld device designed for installing and activating multiplay services over copper/G.fast/ADSL2+/VDSL2,
and Ethernet, between the service provider and the subscriber premises. It verifies that the customer’s modem/router,
equipment and inside wiring are operating correctly. The unit also verifies the location of faults during the installation and
repair of voice and DSL circuits.
Typical applications
l
Automatic Pair Quality Test toward remote test head or
far end device (FED)
l
Multimeter tests
l
Noise tests including power influence and PSD
l
Frequency tests including balance, load coils, and
tracing tone
l
Fault location tests including TDR and RFL
l
SmartR
™
features including Pair Detective and
FaultMapper
l
Supports vectoring and G.INP for operators looking to
mitigate self-FEXT (far end crosstalk) and promote DSL
stability
l
ADSL2+, VDSL2, and G.fast testing
l
Optional ADSL2+ and VDSL2 bonding support
l
Supports Ping, FTP, and Traceroute tests with optional
support for Web Browser, VoIP testing, and IPTV
analysis
l
Ethernet testing for qualifying FTTx service at the
customer premises
l
Configurable pass/fail results for automated testing
l
Proves IPv4 and IPv6 data flow between the network
and the end equipment
Using the 6100
If the equipment is used in a manner not specified by the
manufacturer, the protection provided by the equipment
may be impaired. The 6100 is equipped with a series of
interfaces shown in the following views:
Front
Touchscreen
Power LED
Speaker
Battery LED