ACS-CONTROL-SYSTEM GmbH
l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]
118
Anhang
Universal Data Manager
118
Function
Description
Start/stop recording
The device only saves data as long as a high signal is present
Set point monitoring
on/off
The entire set point monitoring function of the device can be switched on (for
"high") or switched off (for "low").
Start/stop analysis 1
Starts/ends the external analyses (the analysis only runs as long as the signal is
high). Measured value recording for the graphic display continues.
Options
Switched off, Start recording, Set point monitoring on/off, Start/stop analysis 1
Factory setting
Switched off
Switches relay
Navigation
Expert → Application → Maths → Maths x → Switches relay
Direct access code: 400007-000
Examples: Maths 1: 400007-000; Maths 4: 400007-003
Description
Switches the respective relay when the digital input is low or high.
Please take note of the connection hints in the operating manual!
Only visible if the result is = control input or state
Options
Not used, Relay x
All the available relays are displayed.
Factory setting
Not used
Description 'H'
Navigation
Expert → Application → Maths → Maths x → Description 'H'
Direct access code: 400008-00x
Examples: Maths 1: 400008-000; Maths 4: 400008-003
Description
Condition description when the digital input is active. This text is both shown in the
display and saved to memory.
Only visible if the result is = control input or state
User entry
Text (max. 6 characters)
Factory setting
On
Description 'L'
Navigation
Expert → Application → Maths → Maths x → Description 'L'
Direct access code: 400009-00x
Examples: Maths 1: 400009-000; Maths 4: 400009-003
