ACS contsys RCE 300 Manual Download Page 41

Page: 41 / 152

ACS-CONTROL-SYSTEM GmbH

l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]

Universal Data Manager

Operation

•

Actual intermediate analysis:

Here, you can have the current (i.e. not yet completed) intermediate analysis displayed.

•

Actual day:

Here, you can have the current (i.e. not yet completed) daily analysis displayed.

•

Actual month:

Here, you can have the current (i.e. not yet completed) monthly analysis displayed.

•

Actual year:

Here, you can have the current (i.e. not yet completed) annual analysis displayed.

•

Search:

Search and display of analyses. Select which analyses should be searched for/displayed:

Intermediate analysis, Daily analysis, Monthly analysis, Annual analysis.

10.10 Changing the display mode

The display mode of the active group can be changed in the main menu under

"Operation

-> Change display mode"

Change display mode:

The following display modes are possible: Curve, Curve in ranges,

Waterfall, Waterfall in ranges, Bargraph and Digital display.

The various display modes have no influence on the signal recording.

10.11 Adjusting the brightness of the display

You can adjust the brightness of the display in the main menu under

"Operation -> Adjust

brightness"

Parameter

Possible settings

Description

Adjust brightness

0-255

Default:

Sets the brightness of the display

Summary of Contents for RCE 300

























































































































































Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands

ACS contsys RCE 300, Manual

Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands