ACS contsys RCE 300 Manual Download Page 83

Page: 83 / 152

ACS-CONTROL-SYSTEM GmbH

l Lauterbachstr. 57 l D-84307 Eggenfelden l www.acs-controlsystem.de l [email protected]

Universal Data Manager

Anhang

Navigation

Expert → System → Device options → Slot 3

Direct access code: 990002-000

Description

Hardware and software options.

Cannot be edited.

The assignment can be specified in the PC operating software for offline

configuration.

Options

Not assigned, Universal inputs

Factory setting

Not assigned

Communication

Navigation

Expert → System → Device options → Communication

Direct access code: 990006-000

Description

Hardware and software options.

Options

USB + Ethernet, USB + Et RS232/485

Factory setting

USB + Ethernet

Fieldbus

Navigation

Expert → System → Device options → Fieldbus

Direct access code: 990005-000

Description

Hardware and software options.

Options

Not available, Modbus Slave

Factory setting

Not available

Application

Navigation

Expert → System → Device options → Application

Direct access code: 990007-000

Description

Hardware and software options.

Options

Standard, Maths

Factory setting

Standard

Summary of Contents for RCE 300

























































































































































Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands

ACS contsys RCE 300, Manual

Search results

Summary of Contents for RCE 300

Reviews:

Related manuals for RCE 300

Brands by name

Popular brands