ABX Pentra 80 RAB108EA, User Manual

Page: 254 / 306

Pentra 80
7–40
Pentra 80 - User Manual - RAB108EA
▼ Procedure 10: Differential (LMNE)
Repeatability (If Differential results are non repeatable)
a – Perform a concentrated cleaning (see 5.2.4. Clean Cycles, page 7-33).
b – If this does not correct the Differential count, call your ABX Diagnostics representative
department.
6.3. Flags
▼ Procedure 11: Default analysis
WBC:
a – Perform a concentrated cleaning (see 5.2.4. Clean Cycles, page 7-33).
b – Re-run the specimen.
c – Check the operation of liquid valve <23> and <14> (Opening and closing during cycle).
If defective replace the valve.
d – If this does not correct the WBC results, call your ABX Diagnostics representative de-
partment.
RBC, PLT:
a – Perform a concentrated cleaning (see 5.2.4. Clean Cycles, page 7-33).
b – Re-run the specimen.
c – Check the operation of liquid valve <14> (Opening and closing during cycle). If defec-
tive replace the valve.
d – If this does not correct the RBC\PLT results, call your ABX Diagnostics representative
department.
HGB:
a – Check the HGB LED is illuminated when system is on:
Fig. 7–45 HGB LED
b – Perform a concentrated cleaning (see 5.2.4. Clean Cycles, page 7-33).
c – Re-run the specimen.
d – Check the operation of liquid valve <14> (Opening and closing during cycle). If defec-