ABX Pentra 80 RAB108EA, User Manual

Page: 75 / 306

Quality Assurance
Patient Quality Control (XB)
Pentra 80 - User Manual - RAB108EA
3–19
2.5. XB limits
From the «XB Data Grid» screen (see Fig. 3–15, page 3-17) or from the «XB Graphs» (see Fig.
3–14, page 3-16), select the «Target» key to open the «XB Limits» screen (see Fig. 3–17,
page 3-19).
Fig. 3–17 XB limits screen
Select the «Edit» key to modify the limit values then select the value that you want to edit.
Use the «Tab» key to move to the following field.
Press the «OK» key to confirm the new values entries.
If any XB parameter within the last batch is out of its limits, an «XB Alarm» will occur Section
4,
5.3.11. Statistical function flags , page 4-46.
If the printer is selected, a message «XB» is printed out. This flag can also be transmitted
via the data output if it has been activated from the «RS output format».
If a printer is configured with the system, a message stating «XB» will be noted on the print-
out. The «XB» flag can also be transmitted to a host computer if it has been selected in the
«RS232 Output Format». This alarm occurs when the last batch statistical calculations are
complete, no matter which operational screen the operator is in.
The values that are presently displayed in the «XB limits» are factory Default values. These
values can be edited for a specific group or patient population, to detect any possible drift
in calculations.
▼ Printing XB Limits
Use the «Print/Transmit» key to print out the XB limits.