ABX Pentra 80 RAB108EA, User Manual

Page: 252 / 306

Pentra 80
7–38
Pentra 80 - User Manual - RAB108EA
a – Check that hydraulic operations appear to work properly (Reagent level in each cham-
ber and carriage motion).
Sample distribution:
a – Run an analysis cycle and check that specimen distribution is performed correctly into
chambers.
b – A probe rinse is previously carried out in the rinse chamber ( 1 ) (Blood appears in this
chamber).
c – The first specimen is delivered to the first dilution chamber ( 2 ) (Brown colour), the
second to the WBC\Baso chamber ( 5 ) (Clearer) and the third one to the LMNE chamber
( 3 ) (The darkest).
d – Check that bubbling is provided to these chambers once the specimen have been di-
luted.
Fig. 7–44 Chambers
Drain and rinse:
a – Check chambers are drained and rinsed.
b – If operations are faulty, identify the source of the malfunction when possible and call
your ABX Diagnostics representative department.
6.2. Results
▼
Procedure 6: All parameters
Repeatability: According to the CV specifications Section 8, 3.2. Precision (Repeatability) ,
page 8-8
Is the instrument non repeatable on all parameters ? If not perform directly the procedure
corresponding to the non repeatable parameter. If all parameters are not repeatable continue
this procedure.
c – Visually check that the sampling operation appears to be correct.
d – Control the sampling syringe operations (see 5.1.2. Check motors, page 7-23).
e – Control the counting syringe operations (see 5.1.2. Check motors, page 7-23).
4 5
1 2
3