ABX Pentra 80 RAB108EA, User Manual

Page: 62 / 306

Pentra 80
3–6
Pentra 80 - User Manual - RAB108EA
1.2. L.J. Graphs
This is the graphical representation of Quality control data based on the daily value for each
Control parameter, its target value, and range that are plotted on a graph for periodic review.
A total of 100 points per parameter can be displayed on the screen and on the printout.
The hematology parameters are displayed in groups of 5. Two or four views can be accessed
depending on the analysis mode, CBC or DIFF. Changing the parameter view can be made by
selecting the parameter tabs «WBC, RBC, HGB, HCT, PLT», «MPV, MCV, MCHC, HCT, MCH», and
«NEU, EOS, BAS, LYM, MON» (see
Fig. 3–3, page 3-6)
The date displayed is the date of the control run which is indicated by the cursor.
1- Indicates the
target value, shown by
the centerline in the
parameter field
2- Indicates the
Maximum Target
value, shown by the
upper line in the
parameter field
3- Indicates the
Minimum Target value,
shown by the lower
line in the parameter
field
4- Individual
parameter value
points, as indicated
by the cursor
Blue indicates a value
that is lower than the
low limit
Red indicates a value
that is higher than the
upper limit.
Fig. 3–3 L.J. graphs
1
2
3
4