ABX Pentra 80 RAB108EA, User Manual

Page: 237 / 306

Maintenance & Troubleshooting
Super User menu description
Pentra 80 - User Manual - RAB108EA
7–23
5.1. Mechanical menu
5.1.1. Instrument Initialization
Fig. 7–28 Super User\Mechanical\Initialization
Now select the «Initialization» key, and then select the «Run» key to start the initialization
cycle. This cycle will place all mechanical assemblies in a «ready for analysis position». This
will be a starting state for the Auto-sampler, Sampling probe, sample Carriage, Syringes,
etc…. This is also termed as a mechanical homing for all assemblies to their ready position.
5.1.2. Check motors
This menu will allow the user to check the operation of all the motor driven assemblies
independently:
Power off the instrument.
Open the instrument right and left front doors and remove the right-hand and left-hand side
panels (see
3. Instrument panels & cover Removals, page 7-18).
Once the side panels have been removed, power on the instrument.
From the Main screen, select the «Super User Menu» and then /Mechanical /Check Motors.