ABX Pentra 80 RAB108EA, User Manual

Page: 42 / 306

Pentra 80
2–2
Pentra 80 - User Manual - RAB108EA
Section 2: Daily Guide
This section describes basic daily operations, including:
1. Instrument Startup, page 2-2
2. Running the ABX Quality Control, page 2-6
3. Running specimen, page 2-9
4. Results, page 2-13
5. Archives, page 2-15
6. Instrument Shutdown, page 2-16
1. Instrument Startup
1.1. Waste levels, page 2-2
1.2. Printer start up, page 2-2
1.3. Pentra 80 Startup, page 2-2
1.4. Status, page 2-5
1.1. Waste levels
At the beginning of each operating day, check the Waste container to see if it may need to
be emptied.
Wastes must be handled according to your local/national regulations.
(See Section 7,
2.1.3. Waste container replacement , page 7-11)
1.2. Printer start up
Check to see if the printer has enough paper for daily operations. If not, replace the printer
paper according to the Printer User’s manual that is supplied with the instrument.
Press the ON/OFF switch.
Check the control LEDs are ON.
1.3. Pentra 80 Startup
Press the power ON/OFF switch, located on the lower
right-hand side of the instrument, to the “ON”
position