ABX Pentra 80 RAB108EA, User Manual

Page: 242 / 306

Pentra 80
7–28
Pentra 80 - User Manual - RAB108EA
Fig. 7–33 Super User\Mechanical\Holder Adjustment
◆ Depth: For each hole position Id, the depth is measured in millimeters.
◆ Level: This measurement is subtracted from the total depth of each hole position Id, so
that the sample probe will not touch the bottom of any sample tube placed in these posi-
tions.
◆ Position id: This measurement is taken from the Sample probe «Home» position to the top
flat surface of the tube holder.
◆ Accept Values key: This key is used to accept any changes made to the Depth and Level
fields.
◆ Run key: This key allows the acceptance of the number of steps from the Sample probe
«Home» position to the top flat surface of the tube holder. The obtained value is returned
into
Position id field.
◆ Holder Open Time key: This key allows the instrument to calculate the amount of time it
takes for the tube holder to completely open. This value will be entered into the «Time»
field.
5.1.7. Rack adjustment
The Rack Adjustment menu allows to define for each type of rack the depth and level of sam-
pling inside the tube.
◆ Depth: This measurement is the actual depth of the rack in millimeters corresponding to
the rack «Type».
◆ Level: This measurement is subtracted from the depth of sampling in millimeters in, rela-
tionship to the rack «Type».