ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 329 / 1168

Chapter 10 IMA Screens
Management Switch Card User’s Guide
329
Figure 216
IMA > MGTPVC Setup: Slot
The following table describes the fields in this screen.
Table 154
IMA > MGTPVC Setup: Slot
LABEL DESCRIPTION
UP Click this to return to the previous screen.
Delete Click Delete to remove the selected management PVC(s).
Previous 10 Click Previous 10 to show the preceding 10 pages of information.
Previous Click Previous to show the preceding screen if the information cannot be displayed in one
screen.
Page X of X This identifies which page of information is displayed and the total number of pages of
information.
Next Click Next to show the following screen if the information cannot be displayed in one screen.
Next 10 Click Next 10 to show the following 10 pages of alarms.
Index This is the number of the management PVC.
Group This is the number of an IMA group on the line card.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify a channel on this group.
Profile This field displays the ATM profile that this channel uses.
PVID / Priority This field displays the service provider’s VLAN ID and priority settings that this channel uses.
• The PVID here is the service provider’s VLAN ID (the outer VLAN tag) that the line card
assigns to untagged frames received on this PVC.
• Priority is the IEEE 802.1p priority level for the service provider tag that the line card adds
to untagged frames that come in on this PVC. "0" is the lowest priority level and "7" is the
highest.
MUX This field displays the encapsulation type ( llc or vc ) for this channel.
Ip This field displays the IP address the remote IMA device uses to connect with the IMA line
card for management traffic transmission.
Gateway This field displays the IP address a management computer uses to connect with the IES and
manage management traffic.
Select Select one or more PVCs’ check boxes and then use the Delete button to remove it (or
them). Use the Select All check box to select all of the PVCs for all of the line card’s groups.