ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 380 / 1168

Chapter 11 Profile Screens
Management Switch Card User’s Guide
380
11.21 The Profile VoIP DSP Screen
Use this screen to configure the VoIP Digital Signal Processing (DSP) settings. You can then select a
set of DSP information (known as a profile) and assign it to a port in the
Port > VoIP SIP or Port
> VoIP H248 screen.
Click Profile > VoIP DSP . The following screen displays.
Conference Transfer Select this to allow a subscriber to make a conference call and then transfer the call.
Apply Click Apply to save the changes in this screen to the system’s volatile memory. The
system loses these changes if it is turned off or loses power, so use the Config Save
link on the navigation panel and then the Save button to save your changes to the
non-volatile memory when you are done configuring.
New While you are modifying a profile, you can click New to start configuring a fresh profile
without saving your changes.
Cancel Click Cancel to start configuring the screen again.
Index This is an incremental number indicating the order in which the call service profiles
were created.
Name This is the name of the call service profile.
Select Select the call service profile you wish to modify or delete.
Modify Select a call service profile and click this in order to edit its configuration.
Delete Select a call service profile and click this to delete the profile. Once deleted,
information cannot be retrieved.
Table 178
Profile > VoIP SIP CALLSVC Screen
LABEL DESCRIPTION