ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 759 / 1168

Chapter 29 port Commands
Management Switch Card User’s Guide
759
enet bandwidth < slot-port > < ingress-
rate > < egress-rate >
Sets the incoming or outgoing bandwidth control
for the specified Ethernet (ELC) subscriber port(s)
(0~99968 Kbps).
ingress-rate
: The incoming bandwidth rate on a
port.
egress-rate
: The outgoing bandwidth rate on a
port.
8
dot3ad aggport
< slot-port >
t1|t2|…|t10|none
Creates a link aggregation trunk group for
Ethernet (ELC) subscriber ports. 8
disable < slot >
t1|t2|…|t10
Turns off link aggregation on the specified
subscriber port trunk group. 8
enable
< slot > t1|t2|…|t10
[lacp]
Turns on link aggregation on the specified
subscriber port trunk group.
lacp
turns on LACP
protocol.
8
show < slot >
Displays Ethernet (ELC) subscriber port link
aggregation settings. 1
dt disable < slot-port >
Turns off double tagging on the specified ELC
subscriber port.
Note: These
port enet dt
commands only
support the GLC1320G-55 line cards.
8
enable < slot-port >
Turns on double tagging on the specified ELC
subscriber port. The ELC adds two VLAN tags
specified using the command to untagged frames
flowing through the port. 8
set < slot-port >
< svid > < spriority >
< cvid >
Sets the inner c-tag (customer VLAN tag), the
outer s-tag (service provider VLAN tag), and the
IEEE 802.1p priority level for the s-tag for the ELC
subscriber ports. 8
flowctrl disable < slot-port >
Turns off flow control on an ELC subscriber port. 8
enable < slot-port >
Turns on flow control on ELC subscriber port. 8
frametype < slot-port > all|tag
Sets the ELC subscriber port(s) to accept VLAN
tagged and untagged Ethernet frames or only
tagged. 8
priority < slot-port >
< priority >
Sets the ELC subscriber port(s) priority (0~7). 0 is
the lowest priority level and 7 is the highest. 8
pvlan delete < slot-port >
< etype >
Deletes the specified Protocol VLAN membership
entry for a GLC subscriber port.
Etype
: This is a number of four hexadecimal digits
that specify the Ethernet type of a specific
protocol. For example, 0806 is the Ethernet type,
0x0806, for ARP (Address Resolution Protocol)
traffic. The system checks for untagged frames
with this Ethernet type.
Note: These
port enet pvlan
commands only
support the GLC1320G-55 line cards.
8
Table 364
port Commands (continued)
COMMAND DESCRIPTION P