ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 694 / 1168

Chapter 22 config Commands
Management Switch Card User’s Guide
694
22.1.1 config default Command
Syntax:
ras> config default
This command resets the system to the factory default configuration. The system restarts with the
factory default settings.
Do not turn off your device while returning to the default configuration.
22.1.2 config save Command
Syntax:
ras> config save
This command saves your configuration when you are done with a configuration session. This
command saves all system configuration to nonvolatile memory. You must use this command to
save any configuration changes that you make, otherwise the system returns to its previously
saved settings when it is restarted. Save your changes after each configuration session.
Nonvolatile memory refers to the MSC’s storage that remains even if the power is turned off.
Configuration saved in the run time (volatile) memory is lost when the power is turned off.
Do NOT turn off your device while saving your configuration.
22.1.3 config show Command
Syntax:
ras> config show sys|ip|switch|port|profile|acl|vlan|multicast|all [nopause]
This command shows the configuration of the specified category.
nopause
allows you to show all
settings at one time so you do not need to press a key to continue.
upload < ip > < filename >
Uploads the specified configuration file to
the MSC from a TFTP server.
ip
: a TFTP server’s IP address
filename
: the path and filename of the
configuration file on the TFTP server
8
show sys|ip|swit
ch|port|pro
file|acl|vl
an|multicas
t|all
[nopause]
Displays the current configuration. 1
Table 351
config Commands (continued)
COMMAND DESCRIPTION P