ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 65 / 1168

Chapter 3 The Web Configurator
Management Switch Card User’s Guide
65
3.3 Navigation Panel
In the navigation panel (the column on the left), click a main link to reveal a list of submenu links.
The following table describes the links in the navigation panel.
Table 3
Navigation Panel Links
LINK DESCRIPTION
ACL
DHCP Relay This link takes you to a screen where you can configure DHCP relay information and specify
the DHCP server(s).
DHCP Snoop This link takes you to screens where you can activate DHCP snooping and configure static
client IP addresses on a port. You can also configure LAN 2 LAN to control whether or not a
DHCP server connected to a subscriber port is permitted to receive and send traffic through
the IES.
Downstream
Broadcast This link takes you to a screen where you can block downstream broadcast packets from
being sent to specified VLANs on specified ports.
MAC Count This link takes you to a screen where you can limit the number of MAC addresses that can
connect to a subscriber port.
MAC Filter This link takes you to a screen where you can allow only traffic from specified source MAC
addresses on the specified subscriber ports or PVCs.
OUI Filter This link takes you to a screen where you can allow only traffic from MAC addresses with
the specified OUI on the specified subscriber ports.
Packet Filter This link takes you to a screen where you can allow or drop specified packet types on the
specified subscriber ports or PVCs.
802.1X PNAC This link takes you to a screen where you can configure RADIUS (Remote Authentication
Dial-In User Service) and IEEE 802.1x authentication settings.
Upstream
Broadcast This link takes you to a screen where you can configure the bandwidth for upstream
broadcast packets for the line card.
Rule This link takes you to a screen where you can apply ACL profiles on the PVCs.
Anti Macspoof This link takes you to a screen where you can enable or disable protection against MAC
address spoofing.
DSCP This link takes you to a screen where you can configure DSCP mapping (priorities) for
individual subscriber ports.
PPPoE This link takes you to a screen where you can configure PPPoE line information for
individual VLANs.
Loop Guard This link takes you to screens where you can configure loop guard for individual ports.
Subnet VLAN This link takes you to a screen where you can configure subnet based VLAN to group traffic
into logical VLANs based on the source IP subnet you specify.
Upstream Storm This link takes you to a screen where you can configure limits for how many broadcast,
multicast and destination lookup failure (DLF) packets a port receives per second from the
subscriber.
Arp Inspection This link takes you to a screen where you can configure ARP inspection to drop ARP packets
if the MAC address to IP address binding does not match that of a learned or manually
added trusted client.
DHCPv6 Relay This link takes you to a screen where you can configure DHCPv6 relay information and
settings.
MACFF This link takes you to a screen where you can configure RFC 4562 MAC forced forwarding
rules for subscribers. This has matched subscribers then send all traffic through an pre-
defined gateway which forwards or routes the subscriber traffic.
Alarm