ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 190 / 1168

Chapter 8 Multicast Screens
Management Switch Card User’s Guide
190
The following table describes the labels in this screen.
Table 76
IGMP Port Setup
LABEL DESCRIPTION
Slot Select the number of a line card’s slot.
Port Select the number of a DSL port on the line card.
Load Click Load to retrieve the port’s IGMP filter profile setting and display it in the Profile drop-
down list box.
Filter Profile Select an IGMP filtering profile.
Bandwidth Select Enable and enter the maximum accumulated bandwidth (in Kbps) allowed for the
multicast traffic flowing through the port.
IGMP Count Select Enable and enter the maximum number of multicast groups of which the port can be
a member.
IGMP Message
Count Select Enable and enter the maximum number of multicast packets allowed to flow through
the port in a second.
Apply Click Apply to have the specified DSL port use the IGMP port setting.
Cancel Click Cancel to close the screen without saving your changes.
Copy Do the following to copy IGMP port settings from one DSL port to another DSL port or ports.
1. Select the radio button of the DSL port from which you want to copy IGMP filter profile
settings.
2. Click Copy to open the following screen.
Figure 114
IGMP Port Setup: Copy
3. Select a line card to which you want to copy settings.
4. Select the check boxes of the DSL ports on the line card to which you want to copy the
IGMP filter profile setting. Click Select All to mark all of the port check boxes or click
Select None to clear all of the port check boxes.
5. Click Apply to copy the IGMP filter settings to all of the ports that you have selected in
this screen. Click Cancel to close the screen without saving changes.
ID This column lists the slot numbers of the line cards. Click the ID number of an active line
card to go to a screen where you can copy a DSL port’s IGMP filter profile setting to another
DSL port.