ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 370 / 1168

Chapter 11 Profile Screens
Management Switch Card User’s Guide
370
Figure 237
Profile > Alarm VDSL2 > ChanProfile
The following table describes the labels in this screen.
11.17 Alarm SHDSL Profile Screen
Click Profile> Alarm SHDSL in the navigation panel to open the following screen. Use this screen
to configure alarm profiles for the SHDSL ports. Later you can apply the alarm SHDSL profiles to
SHDSL ports in the
SHDSL Port Setup screens.
Alarm SHDSL profiles define SHDSL port alarm thresholds. The system sends an alarm trap and
generates a syslog entry when the thresholds of the alarm profile are exceeded.
Table 174
Profile > Alarm VDSL2 > ChanProfile
LABEL DESCRIPTION
Name Enter a descriptive name for identification purposes.
XTUC Configure the thresholds in this column for the system (XTUC).
XTUR Configure the thresholds in this column for CPE devices (XTUR).
15 Min Coding
Violations
Threshold Enter the number of Code Violation (incorrect cyclic redundancy check) that are permitted
to occur within 15 minutes.
15 Min Corrected
Blocks Threshold Enter the number of error blocks that can be corrected within 15 minutes.
Apply Click Apply to save the changes in this screen to the system’s volatile memory. The
system loses these changes if it is turned off or loses power, so use the Config Save link
on the navigation panel and then the Save button to save your changes to the non-
volatile memory when you are done configuring.
New While you are modifying a profile, you can click New to start configuring a fresh profile
without saving your changes.
Cancel Click Cancel to start configuring the screen again.
Index This is the index number of the alarm profile.
Name This field displays the descriptive name for the VDSL channel alarm profile.
Modify Select a profile’s Select radio button and click Modify to edit the profile.
Delete Select a profile’s Select radio button and click Delete to remove the profile.