ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 1032 / 1168

Chapter 34 sys Commands
Management Switch Card User’s Guide
1032
acct commands disable
Disables accounting of command sessions on the
system. 14
enable < privilege >
Enables accounting of CLI sessions and specifies
the minimum privilege level (1~14) for the CLI
sessions that should be recorded. 14
acct exec disable
Disables accounting of administrative sessions via
SSH, Telnet or console on the system. 14
enable
<radius|>
<start-stop|stop-
only> <broadcast>
Enables accounting of administrative sessions via
SSH, Telnet and console port and specifies the
mode and protocol method. Optionally, sends
accounting information for administrative sessions
via SSH, Telnet and console port to all configured
accounting servers at the same time (1 or 0). 14
acct show
Displays accounting settings configured on the
system. 1
acct system disable
Disables accounting of system events on the
system. 14
enable
<radius|>
Enables accounting of system events and specifies
the protocol method. 14
acct update <1-2147483647>
Sets the update period (in minutes) for accounting
sessions. This is the time the system waits to send
an update to an accounting server after a session
starts. 14
radius acct delete <index>
Removes the RADIUS accounting server entry. 14
mode index-
priority|round-
robin
Specifies how the system decides which RADIUS
server to select if you configure multiple servers.
index-priority
: The system tries to authenticate
with the first configured RADIUS server. If the
RADIUS server does not respond, then the system
tries to authenticate with the second RADIUS
server.
round-robin
: The system alternates between
RADIUS servers that it sends authentication
requests to.
14
set <index> < ip >
< port > < secret >
Specifies the index number, IP address, port
number and key of the RADIUS accounting server
entry.
index
: 1 or 2.
port
: server port, 1~65535
secret
: 1-32 alphanumeric characters
14
show
Displays RADIUS accounting server settings. 1
timeout <1-1000>
Specify the amount of time (in seconds) that the
system waits for an authentication request
response from the RADIUS accounting server.
In
index-priority
mode, the timeout is divided
by the number of servers you configure. For
example, if you configure two servers and the
timeout is 30 seconds, then the system waits 15
seconds for a response from each server.
14
radius auth delete <index>
Removes the RADIUS authentication server entry. 14
Table 387
sys Commands (continued)
COMMAND DESCRIPTION P