ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 790 / 1168

Chapter 29 port Commands
Management Switch Card User’s Guide
790
29.10.10 port enet qratelimit Command
Syntax:
port enet qratelimit < slot-port > < profile >
This command sets the specified Ethernet port(s) to use a profile of per-queue rate limiting
parameters
The following example sets port 13 on the ELC in slot 7 to use a per-queue rate limiting profile
named test.
29.10.11 port enet qschedule Command
Syntax:
port enet qschedule <slot-port> [<spq> | <wrr <wt0> <wt1> <wt2> <wt3> <wt4> <wt5>
<wt6> <wt7>>]
This command sets the specified Ethernet port(s) Class of Service (CoS) scheduling method. SPQ
(Strict Priority Queuing) services queues based on the traffic’s IEEE 802.1p priority.
WRR (Weighted Round Robin) gives queues with larger weights more service. wt0 - wt7 set the
priority weight (0~15) of each IEEE 802.1p priority queue.
The following example sets port 13 on the ELC in slot 7 to use SPQ.
29.10.12 port enet pvid Command
Syntax:
port enet pvid < slot-port > < vid >
where
This command sets the Port VLAN ID assigned to untagged frames or priority frames (0 VID)
received on this Ethernet subscriber port(s).
The following example sets the PVID of port 5 on the ELC in slot 4 to 76.
ras> port enet qratelimit 7-13 test
ras> port enet qschedule 7-13 spq
< pvid >
=
The default Port VLAN ID (PVID) assigned to untagged frames or priority-tagged
frames received on this port (1~4094).
ras> port enet pvid 4-5 76