ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 669 / 1168

Chapter 19 acl Commands
Management Switch Card User’s Guide
669
The mapping table shows service levels (0~63) and their priority for data transmission. For
example, to find the priority level for the service level 43, find 40 in the left hand column and 3 in
the top row. The intersection of the 3 column and 40 row gives a priority setting of 5.
19.10 acl maccount Commands
Use
maccount
commands to limit how many MAC addresses may be dynamically learned or
statically configured on a DSL port. MAC count commands are listed next.
Note: You cannot enable both MAC count and MAC filtering on the same port at the same
time.
19.10.1 acl maccount disable Command
Syntax:
acl maccount disable < slot-port >
This command disables the MAC count limit on the specified DSL port(s).
The following example turns off the MAC count limit on DSL port 4 on a line card in slot 5.
19.10.2 acl maccount enable Command
Syntax:
acl maccount enable <slot-port>
This command enables the MAC count limit on the specified DSL port(s). You can only enable the
MAC count filter on DSL ports that do not have the MAC filter enabled.
The following example turns on the MAC count limit on DSL port 4 on a line card in slot 5.
ras> acl dscp show
0 1 2 3 4 5 6 7 8 9
---- ---- ---- ---- ---- ---- ---- ---- ---- ----
0 0 0 0 0 0 0 0 0 1 1
10 1 1 1 1 1 1 2 2 2 2
20 2 2 2 2 3 3 3 3 3 3
30 3 3 4 4 4 4 4 4 4 4
40 5 5 5 5 5 5 5 5 6 6
50 6 6 6 6 6 6 7 7 7 7
60 7 7 7 7
ras> acl maccount disable 5-4
ras> acl maccount enable 5-4