ZyXEL Communications MSC1000G Series, Руководство пользователя

Страница: 66 / 1168

Chapter 3 The Web Configurator
Management Switch Card User’s Guide
66
Current Alarm This link takes you to a screen where you can display current detailed alarms by severity or
time period.
History Alarm This link takes you to a screen where you can display historical alarms by severity or time
period.
Alarm Port
Setup This link takes you to a screen where you can set the severity level of alarms to record on
specified ports.
Alarm Edit This link takes you to a screen where you where you can configure the log facility, message
type and severity of the alarm categories.
Alarm Clear This link takes you to a screen where you can erase alarm entries.
Alarm Input This link takes you to a screen where you can configure the names for external alarms.
Diagnostic
LDM This link takes you to a screen where you can perform LDM (Loop Diagnostic Mode) tests
on a subscriber port.
Loopback This link takes you to a screen where you can perform an OAM (Operational, Administration
and Maintenance) F5 loopback test on a subscriber port or PVC.
IP Ping This link takes you to a screen where you can ping a host.
IP Trace Route This link takes you to a screen where you can send a traceroute packet to an IP address
and use the response to determine the path a packet takes to that IP address.
MLT This link takes you to a screen where you can test the lines connected to VOP ports.
CFM Loopback This link takes you to a screen where you can perform a connectivity fault management
loop back test.
CFM Linktrace This link takes you to a screen where you can perform a connectivity fault management
link trace test.
SELT This link takes you to a screen where you can perform a SELT (Single End Loop Test) on a
port to check the distance to the subscriber’s location.
OAM Loopback This link takes you to a screen where you can perform an Ethernet OAM (Operational,
Administration and Maintenance) loopback test to a remote Ethernet device.
IMA Loopback This link takes you to a screen where you can perform an E1, IMA or F5 loopback test to a
remote ADM (Add-Drop Multiplexer) device.
Maintenance
Config Backup This link takes you to a screen where you can back up your current system configuration.
Config Restore This link takes you to a screen where you can restore a previously saved configuration.
Config Reset This link takes you to a screen where you can reset the system back to the factory
defaults.
Config Server This link takes you to a screen where you can configure an FTP or a TFTP server for the
MSC’s configuration file downloading or uploading.
Firmware
Upgrade This link takes you to a screen where you can upload a new firmware.
Reboot This link takes you to a screen where you can restart the system.
AlmHis Backup This link takes you to a screen where you can back up the system’s alarm history to your
computer.
Multicast
IGMP This link takes you to screens where you can enable or disable IGMP proxy or IGMP
snooping and assign IGMP filter profiles to subscriber ports.
IGMP History This link takes you to a screen where you can enable and disable IGMP historical data
collection. You can also clear all IGMP historical data on this screen.
Static Multicast This link takes you to a screen where you can configure static multicast group entries.
Table 3
Navigation Panel Links (continued)
LINK DESCRIPTION